8" & 10" Hydra-Feed & Swing Drive Augers
with Ground Hugger Hopper

Cable trussed for additional strength

Scissor-design undercarriage

Tapered wheel bearings in agricultural hubs

Jack stand for easy hook-up

Hydraulic worm winch lift.

If you're looking for convenience, ease of maneuverability and handling, check out Feterl's line of Hydra-Feed and Swing Drive Augers. The Ground Hugger Hopper, which accompanies these augers, pivots to allow it to follow the ground contour, with the auger at any height! The special flight design, coupled with a special CV joint and a low 10-1/2" profile, make us the envy of our competition.
The Hydra-Feed allows the hopper to be driven hydraulically. The Swing Drive Augers feature a mechanically driven swing hopper which is powered by two off-angle gear boxes which are externally mounted for proper venting and convenient servicing. The open chamber allows the auger to achieve maximum capacity while keeping the rotating power shaft internally mounted. The hopper can be operated and transported on right or left side of auger. Hydraulic lift on all models.

8" Red Hydra-Feed Augers

60', 66' & 72' Lengths
14 Ga. Tube - 10 Ga. Flighting.
Design hydraulic requirements 12 GPM, 1500 PSI
Hopper feeds from right or left.

8" Red Swing Drive Augers

60', 66' & 72' Lengths
14 Ga. Tube - 10 Ga. Flighting.

10" Red Swing Drive Augers

60', 66', & 76' Lengths
14 Ga. Tube - 7 Ga. Flighting.

10" Commercial Swing Drive Augers

60', 66', 76', 86' & 100' Lengths
12 Ga. Tube - 1/4" Strip Flighting.

10" Red and Commercial Hydra-Feed Augers

60', 66' & 76' Lengths.
10" Commercial Models made from 12 Ga. Tube, 1/4" strip Flighting.
10" Red Models made from 14 Ga. Tube, 7 Ga. Flighting.
Design hydraulic requirements 12 GPM, 1800 PSI.

12" Swing Drive Augers
with Ground Hugger Hopper

72', 86', 100' & 120' Lengths

12 Ga. Tube - 1/4" Strip Flighting.

Up to 10,000 bph!

72' Model features a hydraulic cylinder
lift undercarriage.

86', 100' & 120' Models feature a hydraulic
worm winch lift.

NEW!
Optional Hydraulic Drive Kit for lateral movement of
12" Ground Hugger Hopper Powered Wheels!
Hopper can be used on EITHER SIDE of auger!

6", 8", & 10" Top Drive Augers

Cupped intake flighting on 8" & 10" models

Head assembly is grease-packed at the
factory and enclosed for continous lubrication
and weatherproofing

PTO and Electric Drive available for all models

Gas and Hydraulic Drive available for select sizes.

Electric welded tube

Guarded intake with removable clevis tow hitch

4-bolt hub & wheel assembly

Pre-lubricated, sealed wheel bearings

Flexible driveline couplers

Reduction winch

Longer models trussed

All IID's are shielded

Wide wheel track

Precision engineered, 3-shaft gear box

Reversible gear box permits PTO operation from either side

FOUR bearings carry the load

Discharge Relief Spout

6" Red Top Drive Augers

27', 34', 41', 46' & 52' Lengths
Move up to 1500 bph!
16 Ga. Tube - 12 Ga. Flighting

8" Top Drive Augers

28', 31', 34', 41', 46', 55',
60', 66' & 72' Lengths
Move up to 2600 bph!

8" Red Models

14 Ga. Tube - 10 Ga. Flighting

8" Commercial Models

12 Ga. - 7 Ga. Flighting

10" Top Drive Augers

31', 34', 44', 55', 60', 66' & 76' Lengths Move up to 3600 bph!

10"-34'/66' Red Models

14 Ga. Tube - 7 Ga. Flighting

10"-76' Red Models

12 Ga. Tube - 7 Ga. Flighting

10" Commercial Models

12 Ga. Tube - 1/4" Strip Flighting

12" Commercial Top Drive Augers

Available in 34', 40', 46', 55', 60', 66', 72', 76' & 82' Lengths. Move up to 6000 bph! Tube made from 12 Ga.-Flighting rolled from 1/4" strip. Feterl 12" Top Drive Augers are cable trussed for additional strength. The scissor-design undercarriage provides excellent stability. Models 60' and longer have a telescoping undercarriage assembly for low transport clearance. 34', 40', & 46' Models are standard with hand crank brake winch lift. Optional hydraulic worm winch lift available for 40' & 46' Models. 55' thru 82' Models are standard with hydraulic worm winch lift. The guarded intake cage features two convenient insertion points for positioning the clevis tow hitch. PTO or electric drive available.

14" Commercial Top Drive Augers

Available in 40', 55' 66', 72' & 82 Lengths
Move up to 9000 bph! Tube made from 12 Ga.-Flighting rolled from 1/4" strip. Feterl 14" Top Drive Augers are cable trussed for additional strength. The scissor-design undercarriage provides excellent stability. Models 66' and longer have a telescoping undercarriage assembly for low transport clearance. 40' Models are standard with hand crank brake winch lift. 55' thru 82' models are standard with hydraulic worm winch lift. Standard with guarded intake cage and winch style lift tow hitch. PTO or Electric Drive available.

Grain Hoppers
Need an extra hopper with a low profile and high capacity?
Feterl has three models to fit your needs:

10" Easi-Roll Truck Hopper

Hydraulic or Electric
Up to 7500 bph, 7-1/2 HP @ 650 rpm
Optional tow hitch allows the unit to be easily maneuvered around the yard.
90 degrees rotation of wheels allow for ease in rolling hopper left or right, forward or backward.

8" & 10" Independently Powered Hoppers

Hydraulic or Electric Drive.
8" Model-up to 3000 bph; 10" Model-up to 4,200 bph
8" rubber wheels are mounted for right or left movement and can be manually switched for forward or backward movement.

Drive Over Hopper

The Feterl Drive Over Hopper is designed with the customer in mind.
It is built for convenience, ease of operation, versatility, durability, and safety.
Side and center discharge hoppers accommodate hopper bottom trailers, side or center dump gravity boxes or end dump hoist boxes.
Wheels and tow hitch are removable.
Discharge auger available in 10" or 12" diameter.
Hydraulic or Electric Drive.

Grain Cleaners

WHY CLEAN GRAIN? The bottom line is profit. If you grow or handle grain, Feterl Grain Cleaners will add profit to your enterprise. CLEAN GRAIN with no spoilage from "hot spots" and no dockage brings a higher market price. CLEAN GRAIN dries more evenly, faster and with lower energy costs. Fines and broken kernels obstruct air flow in grain dryers. CLEAN GRAIN stores better.

Model 85 Rotary Screen Grain Cleaner

Recommended for use with 8" augers.
Electric, Hydraulic or PTO Drive.
Cleans approximately 2,000 bph!

Model 100 Rotary Screen Grain Cleaner

Recommended for use with 10" augers.
Electric or Hydraulic Drive.
Cleans approximately 3,000 bph!

Model 23090 Rotating
Grain Cleaner

Electric, PTO, Gas Engine or Hydraulic Drive.
Cleans approximately 2,000 bph!
The Model 23090 Rotating Grain Cleaner is designed for high capacity grain handling.
Its dual drum cleaning action removes not only fines, weed seed and chaff, but also large particles such as pods, shucks and cobs.
Various screen sizes available to fit your crop needs.

Source code & object code Copyright 1998:
Primecom Interactive, Inc.
Subject to terms of license agreement.